[s-cars] S6 VAG-COM location

[Ian Duff]

Also check out my crude (understatement!) but effective DIY 2x2 connector
using a Cat5 cable at http://tinyurl.com/33zz6. It's at the old Yahoo
Groups, so I think you'll need a Yahoo! Account to see it, unfortunately.

The pinouts for the Cat5 cable are as follows, copied from a post to me from
Uwe Ross:

Cat 5 Wire colors      Function 
Orange & White/Orange     +12
Brown & White/Brown       K
Blue & White/Green        GND
Green * White/Blue        L

Note that you must untwist and "cross" blue and green, the last two sets of
wire colors are not a typo.  Pull back the outer insulation on the cable you
have now going to the red OBD-II connector and note it's also got green and
blue "crossed".

HTH.

-Ian Duff.
-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of Robert Rauner
Sent: Thursday, 01 January, 2004 1:47 PM
To: s-car-list at audifans.com
Subject: [s-cars] S6 VAG-COM location


Guys:

WOW!  That was fast with your responses.

I now see that I was looking for the OBD II connector, not realizing that
this 
S6 car is the OBD I setup.  I've seen on the Ross-Tech site how to get the 
earlier connecter patch to work with my later model PC setup.

Many thanks for your help.

Bob
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com http://www.audifans.com/mailman/listinfo/s-car-list