[s-cars] Xenon C4 lights Installation Report

[NDoshi at aol.com]

Hello All,

As some of you know, I spent the better part of last weekend putting the O.E. 
Xenon lights in the 95.5 Avant. 

Here is what I have accomplished so far:

The cabling for the lights is - Red (+12v unswitched), Brown - Earth, Yellow 
(Low beam "ON"), Black - Sense Wire for Bulb Monitor circuit.

I took the 12v from the Jumper connection on the firewall (fused 25A). Earth 
is through two bolts, one on each side. The on circuit is taken via an inline 
tap from the existing harness.
I currently have insulated spade connectors plugged into the existing harness 
on the ballast module but that will change (let me know if you guys have used 
a good weatherproof 25 amp / 4 conductor connector)

The city lights are also wired through (although, I am wondering about the 
stress on the 18 gauge wire that now has to feed two bulbs) , Also, does anyone 
know if the city lights are supposed to go off if you turn low beams on? If 
so, I will have to relay them to shut off when the low beams come on.

I will take some photos of the install once I complete the final harness 
termination but this was about as easy/hard as I thought it would be. About the 
same time as a HID retrofit kit with the added benefit of having an OE item 
(now, until it breaks)

Thanks for all the help again.

Nick