[s-cars] Bira S3 for S6 info?

[Marc Swanson]

On Fri, 2004-07-02 at 10:33, Glen Powell wrote:
> Hello all,
> 
> We are members of Bira (the very first member!) but we have not been able to obtain info about the parts list and sources required to implement the Bira System 3 on the Audi S6 20V turbo due to technical network problems. Please forward any info or sources for info you might have on this to glen at tmtek.com. 
> 
> Many thanks in advance!
> 
> -glen  TMTeK  603-233-1043

Hi Glen,

I'm not sure if it was you whom I spoke with at the New England Dragway
last Friday (I was the guy with the green S6 Avant w/European tail
lights), but I met someone from your company that was running a silver
S6 Avant that night.  Great car BTW, VERY consistent (and frequent!)
runs.  I had to laugh when your running average was ~14.3 seconds and
then on one run you added a passenger and ran 13.9! 

Moving on to your question...  is this specifically for your test
vehicle or are you interested in becoming a distributor?

If so, the best thing to do would be to contact Greg Amy directly as I
think they DO have at least one relationship with a vendor:

http://www.bira.org
grega at bira.org

To directly answer your question, the description of system 3 on Bira's
website (http://www.bira.org/info_main.html) seems to sum it up:

"Uses the Porsche 996 Carrera 4-piston monobloc caliper over the
European A8 314x30mm rotor. Fits the '92-97 S4/S6, 2C(1), '92-'94 V8(1).
Fits under 16" wheels."


Hope that helps!


-- 
-Marc Swanson-
95.5 //S6 Avant
87 4ktq
88 90q
www.mswanson.com/audi