[s-cars] DIY FMIC - Almost done, hit a small snag...

[Lewis, Gary M]

As always, Trevor, you are the man.

Now WTH is a wiggens??

-----Original Message-----
From: Trevor Frank [mailto:tfrank at symyx.com] 
Sent: Wednesday, July 21, 2004 2:27 PM
To: Lewis, Gary M; s-car-list at audifans.com
Subject: RE: [s-cars] DIY FMIC - Almost done, hit a small snag...



Weld a bead on it...
Use a wiggens and weld it to it, no silicon tubing.

Ship it to me I will put the bead on for free.

-----Original Message-----
From: s-car-list-bounces at audifans.com [mailto:s-car-list-bounces at audifans.com] On Behalf Of Lewis, Gary M
Sent: Wednesday, July 21, 2004 10:15 AM
To: s-car-list at audifans.com
Subject: [s-cars] DIY FMIC - Almost done, hit a small snag...

Sheads,
I have the DIY FMIC nearly done (total costs now are ~$550), but I need to roll a bead on the ends of the aluminum tubing. The options I know of
are:

1. Have it done locally at a machine shop ($100).  I'm leaning this way. Technically great but a little pricey.

2. Buy my own machine ($400).  Charge everyone who will go after me like $40 to roll a bead on their pipes to recoup the costs. http://www.vansantent.com/bead_tool.htm  This is technically good but pricey.

3. Do it by hand with a press.  Free but scary.

4. Use an aluminum epoxy ($10).  I have heard of some racers doing this, and apparently it works, but I sweat when a piece of the epoxy flies off and goes into my motor.  Scarier than #3.

5. Your super cheap and super brilliant idea here.

The sooner I get an answer to this problem the sooner I will post up pics and a parts list.

Thanks,
Gary Lewis

1995.5 S6 Avant, Green/Ecru, RS2 MAF, RS2 Exhaust Manifold, RS2 Injectors, Custom Turbo (K26 Turbine, Factory K26 Cold side (Audi Works '999' P/N) with 50mm intake and custom Innovative Turbo compressor wheel), TurboXS Type 25 Bypass Valve, Bilsteins, Eibachs, Big Reds, Spec II Clutch.



_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com http://www.audifans.com/mailman/listinfo/s-car-list

=======
Notice: This e-mail message, together with any attachments, contains

information of Symyx Technologies, Inc. that may be confidential,

proprietary, copyrighted, privileged and/or protected work product,

and is meant solely for the intended recipient. If you are not the

intended recipient, and have received this message in error, please

contact the sender immediately, permanently delete the original and

any copies of this email and any attachments thereto.