[s-cars] anyone ever install S6plus bumper onto a 95 S6 SEDAN

[Tony]

You have to replace the piston brackets with ones without pistons and the
two guide brackets on the side, one on each fender. A quick look at my Euro
Etka CD shows

Part umbers
Piston Brackets:
4A0807 129D L
4A0 807 130D R

Guide Brackets:
4A0 807 283A L
4A0 807 284B R

There's the backup Dave.

Here is a link to a UK dealer that can send parts out (my old home town)...

http://www.poole.audi.co.uk/index.jsp?&liveConnect=true

Tony
96 S6


----- Original Message -----
From: "Dave Forgie" <forgied at direct.ca>
To: <s-car-list at audifans.com>
Sent: Saturday, June 05, 2004 12:31 PM
Subject: [s-cars] anyone ever install S6plus bumper onto a 95 S6 SEDAN


> The problem lies with the fact that the S6+ bumper was Euro not
> NAmerica.  In NAmeric we got the 5 mph no-damage bumpers so I could
> easily image (to be backed up by ETKA) that the Euro bumper brackets are
> different than the NAmerican brackets (and/or the S6+ brackets are
> different still from the Euro S6 brackets).  In any event, I think you
> needed more than just the bumper skin to make this install painless
> (i.e. no fabricating).  What you will have now, in terms of "bump"
> resistance, at the end of the day is anybody's guess.  Don't ever have a
> front end accident or you will have some
> " 'splaining to do" (Lucy).
>
> Dave F.
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>