[s-cars] Introduction

[Gabriel Caldwell]

I think I have one of those heads.

Gabriel Caldwell

-----Original Message-----
From: mlp5 [mailto:mlped at qwest.net] 
Sent: June 24, 2004 4:42 PM
To: 'Calvin & Diana Craig'; 'Dan Cordon'; s-car-list at audifans.com
Subject: RE: [s-cars] Introduction


>-----Original Message-----
>From: s-car On Behalf Of Calvin & 
>Diana Craig

>3) I believe the cylinder head was also redesigned.
>

"Redesigned" might be a little strong.  The rear distributor drive was
drop,
but the hole & fitting for a drive are still there, just capped off with
a
plug.  A 3B head can be used in an AAN if you (a) cap the distributor
hole,
the parts, a plug, one clamp and a nut are available from Audi; and (b)
have
a cam position trigger adapted and fitted to the head.  I believe this
was
even done on some early factory heads

>As far as the model year thing goes, there still isn't a car 
>made today similar to the '95.5 S6 Avant.  

There are 1995 (non EDL) Avants.  These come with switchable rear diff
locks.

HTH
mike

_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list