[s-cars] Power Output Stage Connector -- where to get one?

[bob.rossato at att.net]

If you need to get it going this weekend, the best you'll be able to do at this stage is go to a local VW or Audi dealer whose parts department is open on Sat. and get a wire to splice in.  VW/Audi no longer supplies the terminals loose and only sell them pre-crimped to a yellow wire.  Bring the broken one with you, if you still have it, to match it up.  You'll have your choice of wire gauge that it is crimped on to as well.  It will come with two terminals crimped on, one at each end, and you just cut it wherever is most convenient for your application.  Probably about $3-$4.

If later on you want to fix it so it looks stock, you can get the loose terminals from Wurth.  You'll also need the proper crimping tool, however.

Bob



-------------- Original message from "Voits" : -------------- 
> Guys: 
> I have a faulty POS and while switching wires among the connectors I managed 
> to break one of the crimp-on terminals that fits within the connector. I 
> knew better than to be forcing it but I was in a hurry. Real smart. 
> 
> Where's the most convenient place to get one? what are my options. I'd 
> really like to use my car this weekend! 
> Steve Voit 
> 95.5 urS6 
> Mercer Island (Seattle)