[s-cars] Boost loss

[Mark Pollan]

I too need to pressurize my system to check for leaks.  I seem to remember a
write-up on how to both do this and how to build a pressure tester.  Can
somebody point me in the right direction.  I think it had to do with some of
those PVC plumbing pieces but...


Regards,

Mark


>A bit of advice. Visual check for leaks are pretty unreliable.
>Borrow/build a pressure tester and pressurize the system. Then listen
>for the leak. You may find that it is not the hoses but the clamps or
>O-rings that are bad.
>Rich