[s-cars] My new Bilstein/Eibach setup

[Tony]

So I just got my S6 back from the shop with new suspension, wheel bearings, control arms, front rotors and pads and new handbrake cables. Haven't driven it too much but felt just a little stiffer than originals.

Some may recall I was seeking advice about the use of the 10mm rear spacer. Well, just as well I took best of five answers, cause I went with the spacers and glad I did. A quick measure without being overly accurate, all heights are the same to within 1mm, though the tires were still hot and one more than others due to a sticky rear caliper. Drop all around was about one inch. 

Alignment was camber -1.3 and -1.5. I haven't yet checked with spec. but I believe -1.5 is a little out. So may go with adjustable camber plate but too late for GP :(

More later.

Tony
96 S6