[s-cars] My new Bilstein/Eibach setup

[Tony]

Hi Dave,

See this url for the ECS Tuning site

http://www.ecstuning.com/s4s6camberplatespage.htm

Camber is spec.'d between -0.4 and -1.3 deg., which is what alignment report
is also showing, so only one side, passenger side, is out of spec. Caster
and toe and both in spec.

Cheers,

Tony
96 S6

----- Original Message -----
From: "Dave Forgie" <forgied at ae.ca>
To: <s-car-list at audifans.com>
Sent: Wednesday, June 30, 2004 5:49 PM
Subject: [s-cars] My new Bilstein/Eibach setup


Tony:  "Spec" is under -1.0 deg, e.g. -0.8 deg. is what I run.  You do not
need adjustable camber plates unless you are tracking your car, i.e. you
want one setting for the street and one for the track and you actually
change it.  If you just want to bring the alignment back into spec and never
change it , you can file out the holes in the NEW strut mounts (that you
should have added) OR you can redrill the NEW strut mounts as per a template
developed by Igor Kessel that lives on Charlies website at:

http://www.elektro.com/~audi/alignment/

Do you still need the fog light lamp holder part no.?

Dave F.


This e-mail and its attachments are intended solely for the person or entity
to which it is addressed and may contain confidential and/or privileged
information.  Any review, dissemination, copying, printing or other use of
this e-mail by persons or entities other than the addressee is prohibited
If you have received this e-mail in error, please contact the sender
immediately and delete the material from any computer.


_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list