[s-cars] Turbo Trim + Water injection

[Lewis, Gary M]

> Last for you water injection fanatics, or wana-be's there's 
> Eric's http://not2fast.wryday.com/thermo/water_injection/ 
> including all the DIY info you might want.

Almost exactly mimics the drawing and parts list I came up with by lurking and mimicing the DSM water-injection list.  Bunch of guys running 11 and 12 sec qtr mile using more or less exactly this set-up.  This set-up is about ~$400 with a ton of DIY, I estimated 80+ hours.  

The Aquamist 2D is much more elegant, compact, and more-or-less a bolt-on (4-8 hrs or so from box opening to driving around saying "gee, it doesn't ping on 91 octane), but in the ~$650 range, probably more given current exchange rates.  


Gary Lewis

1995.5 S6 Avant, Green/Ecru, RS2 MAF, RS2 Exhaust Manifold, RS2 Injectors, Custom Turbo (K26 Turbine, Factory K26 Cold side (Audi Works '999' P/N) with 50mm intake and custom Innovative Turbo compressor wheel), TurboXS Type 25 Bypass Valve, Bilsteins, Eibachs, Big Reds, Spec II Clutch.