[s-cars] Attempted Translations from Garrett to KKK Speak

[MLP]

Does anyone have a KKK Rs2 turbo sitting about out on a garage shelf and
a good electronic or mechanical caliper handy by chance?  

If "trim" is a function of inducer diam^2 / exducer diam^2 x 100, then,
ignoring blade counts & shapes etc. where does the K26/RS2 wheel fit in
the following table?

            Minor      Major    MinDiam^2 /
Turbo       diameter  diameter  MajDiam^2 
_______     ______    ______    = "Trim"__
T3-35		1.396	    2.367     34.8%
T3-40		1.484	    2.367     39.3%
T3-45		1.595	    2.367     45.4% 

K24/ mm     @42.3mm   @60.5     48.9%
K24 inches  1.665	    2.382 

T3-50 	1.674	    2.367     50.0%
T3-55		1.760	    2.367     55.3%    
T3-60		1.830	    2.367     59.8%

T3-Super    1.900     2.367     64.4%
  60 
************ TO4E Compressors *********
TO4E-40     1.870    2.950      40.2%
To4E-46     2.003    2.950      46.1%
TO4e-50     2.122    3.000      50.0%
TO4E-54     2.170    2.950      54.1%
To4E-57     2.230    2.950      57.1%
TO4E-60     2.290    2.950      60.3%

Mike "just trying to fill in some of the gaps" P

PS as long as you have the RS2 compressor wheel out naked on the table,
how many blades are there?  How tall is the wheel too.