[s-cars] T-belt R&R

[lebakken1 at netzero.com]

Au contraire.

Not only has it been moved the requisite several inches forward on the right (pass.) side, it is being held in place with a super high tech holding fixture:

8" piece of 1 x 2 cedar, with about a 3/8" hole drilled 1" from the end;
1.5" diameter fender washer
3/8" x 1" Lag bolt threaded through, leaving .1" clearance between washer and wood.

Apply to R/H radiator mount and tighten.

Works well.

Craig Lebakken
94 S4

Craig Lebakken
94 S4

Please note: message attached