[s-cars] Cody Payne survives dyno...

[Cody Payne]

Just one minor correction I am running the 7A cam vs. the RS2
 
cp

  _____  

From: Djdawson2 at aol.com [mailto:Djdawson2 at aol.com] 
Sent: Sunday, November 14, 2004 12:30 AM
To: mlped at qwest.net; Cody Payne; CaptMagu at aol.com;
s-car-list at audifans.com
Subject: Re: [s-cars] Cody Payne survives dyno...


In a message dated 11/13/2004 7:19:45 PM Mountain Standard Time,
mlped at qwest.net writes:



	Dave, don't you have data for the same turbo, but off Ian's car?
Do the
	profiles match up between the two installs? 
	



Cody's car is hitting sooner... but the temps were considerable cooler
for Cody's run.  Other differences... Cody has an FMIC, the RS2 exhaust
cam, and a stromung.  Despite these differences, the charts profiles are
virtually identical, except for Cody's 4.5-5.5k rpm dip, where his curve
almost bumps into Ian's.  Ian's peak boost was 24psi, and it wasn't
maintained well.  Better boost control should net Cody some more
power... and if the dip can be figured out, he should find a better
peak.  Cody's dyno curves fluctuate a great deal compared to Ian's using
the same turbo.
Dave