[s-cars] tales from the dyno

[Djdawson2 at aol.com]

In a message dated 10/19/2004 6:31:51 PM Mountain Daylight Time, 
joe.pizzimenti at gmail.com writes:

> Sounds to me like there's too much ignition advance there.  The 30R
> should push more air there than an RS2, so you may want to dial boost
> back a little bit manually to compensate...unless you have another
> chipset you can try out.
> 


Dear "Manlove,"
I've tried that... and lowered the boost at the upper rpm range below what 
the RS2 was running.  I currently have a peak of 26psi.  With the RS2... during 
the momentary overboost (about 3 seconds) I would routinely see 29psi.  
Still... no better.

With luck, I'll be trying other software at the end of the week.
Take care,
Dave