[s-cars] More dyno results... the turbo issue

[James Bufkin]

There is a number stamped on the inside of the inlet.
That is the A/R of the KKK housing.   Should say 6 or 8 for K26 
housings,  Those are the most typical.  RS2 is #6.  Some Turbonetics 
castings are slightly larger.


> > Marc, what K26 housing are you using?  The #8 is not working for us.
>
>not sure.  Is it just the outlet diameter that distinguishes them?  I'll
>measure when I take it off.