[s-cars] friggen HAP RSB (cont)

[Lee Levitt]

My avant needed some slight tweaking (repositioning th ebar slightly) to
avoid contact between the springs and the HSRB too. I was also running
Bilsteins/Eibachs.

After the tweaking it was fine.

BTW, my avant is going in for Bilsteins in the morning. Slippery slope?
Nope, no slippery slope there.

Lee
'02 A6 quattro avant (Hsport bars, OZ SLs/Toyos, tint, radar, PhatBox, sport
wheel,) (Looking for ecode xenons, Nav Plus. And that's it. I promise!)
'96 A6 quattro avant 

> -----Original Message-----
> From: s-car-list-bounces+lee=wheelman.com at audifans.com 
> [mailto:s-car-list-bounces+lee=wheelman.com at audifans.com] On 
> Behalf Of marc weiner
> Sent: Monday, September 20, 2004 7:31 PM
> To: s-car-list at audifans.com
> Subject: [s-cars] friggen HAP RSB (cont)
> 
> Took my car to ASW this afternoon for the 3rd time, and Brian 
> adjusted the lower control arms (I believe) so that the RSB 
> no longer contacts the spring perch - at least for now.  I 
> will report back if any shifting (walking) of the RSB occurs 
> to cause more rubbing.  I am going to keep my fingers crossed 
> as I like the way it handles as long as I don't have to hear 
> the screeching nails on the chalkboard sound on every bump.  
> As a side note my car has Eibach Springs and Bilstein Sports 
> - Brian said cars w/ lowering springs make the correct 
> installation a bit more difficult FWIW.  Thanks for your 
> responses - he did mention having to start welding stuff if 
> this doesn't do the trick.  
> -Marc
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
> 
> 
>