[s-cars] New album,,, FrankenTurbo

[Djdawson2 at aol.com]

In a message dated 9/28/2004 5:33:55 PM Mountain Daylight Time, 
Strangconst at rogers.com writes:

> Well,  I have always been somewhat skeptical of the RS2 EM...
> So I will take some measurements from each cylinder at the port (or close)
> once things are up and running with new software.

No need to take measurements...  Go out sometime and run it hard (at night).  
Look at the stock EM after the hard run.  It will be glowing red at #4 and 
5... nowhere else.  An RS2 EM subjected to the same type of run will be glowing 
evenly throughout.  I don't think there's any doubt that the stock EM has a 
flow problem.

> 
> I am concerned that the compressor housing might not fit with an RS2 EM.
> Certainly I am not against it, it will give me things to do later.
> 

It will require some grinding to fit.
HTH,
Dave