[s-cars] Injector insert sealant?

[Trevor Frank]

So let's clear things up, cuz I think your talking about the plastic
inserts that go into the intake manifold casting?  Am I right, cuz if
you are I have never seen them leak, maybe you have dirt or something
gummed up with them.  Did they leak before or did you just take them out
and replace them using xxx on them and then they leaked?  If it's
orings, I like parker or dow o-ring lube, particularly like the
non-curing silicone stuff, dow corning 55 or 111.  If it's the plastic
parts then I would say you might be best to get new ones, and I dunno
but I would think Halomar or dow 111 might be the most I would use, If I
got really pissed maybe a Teflon paste, but the good stuff.  I suspect
if you have used tape then you have f...ed things up a bit and will have
to really clean everything up before you can get it to seal again. 
-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of Stacy Mohr
Sent: Monday, April 25, 2005 1:27 PM
To: s-car-list at audifans.com
Subject: [s-cars] Injector insert sealant?

Can someone tell me which sealant to use on the injector inserts (aan).
I have tried teflon tape, toctite 565, and now permaseal gasket maker.
I would have tried rtv but that is not suitable with fuel.  Nothing
seals it, nothing is strong enough to hold pressure.  The bentley says
nothing about them.  Please help before I JB weld them in!


Thanks
Stacy


_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list

=======
Notice: This e-mail message, together with any attachments, contains
information of Symyx Technologies, Inc. that may be confidential,
proprietary, copyrighted, privileged and/or protected work product,
and is meant solely for the intended recipient. If you are not the
intended recipient, and have received this message in error, please
contact the sender immediately, permanently delete the original and
any copies of this email and any attachments thereto.