[s-cars] Injector insert sealant? Calling Trevor Frank- whitecourtesy phone please!

[Trevor Frank]

111, 55, or even thicker than 111 is 112.  I and others I think have had good luck with this as well sealing valve cover gasket.  Makes it leak tight and reusable.

-----Original Message-----
From: s-car-list-bounces at audifans.com [mailto:s-car-list-bounces at audifans.com] On Behalf Of brian bilotti
Sent: Monday, April 25, 2005 4:01 PM
To: Jerry Scott; s-car-list at audifans.com
Subject: Re: [s-cars] Injector insert sealant? Calling Trevor Frank- whitecourtesy phone please!

Am I not reading this right? Didn't Stacy ask>>>Can
someone tell me which sealant to use on the
> injector inserts (aan). Then he went on to mention
plumbers tape, blah, blah. It seemed to me he doesn't
want something for the injectors, just for the
inserts!!
I've had very good luck with Loctite 574 Flange
Sealant but not sure if this would be the proper
application.

Trevor, you're the materials engineer, what say you???

bb
--- Jerry Scott <jerryscott at earthlink.net> wrote:
> I have worked with various engineered rubber
> products in my past as an
> engineer, and we always used liquid dish soap as a
> lubricant. It will
> not damage rubber and will dry harmlessly after a
> while. My 2¢.  I also
> used this the last time that I had my injectors out.
> Jerry
>
> Steve Powers wrote:
>
> >that's what I was wondering. I have also heard that
> soaking the
> >o-rings in a bit of gasoline overnight will help
> them seal. it can't
> >hurt them.
> >
> >Steve
> >
> >On 4/25/05, Mark Strangways
> <Strangconst at rogers.com> wrote:
> > 
> >
> >>Well, Umm...
> >>
> >>I have had my injectors in and out about 100 times
> last year. The only thing
> >>I used was some dielectric grease to ease the
> o-ring in..
> >>
> >>You have the o-ring on the injectors right  ?
> >>
> >>Mark
> >>----- Original Message -----
> >>From: "Stacy Mohr" <samsims at ulmail.net>
> >>To: <s-car-list at audifans.com>
> >>Sent: Monday, April 25, 2005 4:26 PM
> >>Subject: [s-cars] Injector insert sealant?
> >>
> >>   
> >>
> >>>Can someone tell me which sealant to use on the
> injector inserts (aan).
> >>>I have tried teflon tape, toctite 565, and now
> permaseal gasket maker.
> >>>I would have tried rtv but that is not suitable
> with fuel.  Nothing
> >>>seals it, nothing is strong enough to hold
> pressure.  The bentley says
> >>>nothing about them.  Please help before I JB weld
> them in!
> >>>
> >>>
> >>>Thanks
> >>>Stacy
> >>>
> >>>
> >>>_______________________________________________
> >>>S-CAR-List mailing list
> >>>S-CAR-List at audifans.com
>
>>>http://www.audifans.com/mailman/listinfo/s-car-list
> >>>
> >>>     
> >>>
> >>_______________________________________________
> >>S-CAR-List mailing list
> >>S-CAR-List at audifans.com
>
>>http://www.audifans.com/mailman/listinfo/s-car-list
> >>
> >>   
> >>
> >_______________________________________________
> >S-CAR-List mailing list
> >S-CAR-List at audifans.com
> >http://www.audifans.com/mailman/listinfo/s-car-list
> >
> > 
> >
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list

=======
Notice: This e-mail message, together with any attachments, contains
information of Symyx Technologies, Inc. that may be confidential,
proprietary, copyrighted, privileged and/or protected work product,
and is meant solely for the intended recipient. If you are not the
intended recipient, and have received this message in error, please
contact the sender immediately, permanently delete the original and
any copies of this email and any attachments thereto.