[s-cars] CV Boot Question

[Toborg Michael (AC-SM/ESC3) *]

I did the 148 Ft/Lbs + 1/4 turn 

-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of Douglas Fifield
Sent: Thursday, April 28, 2005 12:14 PM
To: s-car-list at audifans.com
Subject: [s-cars] CV Boot Question

First, thanks for the link to the CV Boot Replacement write-up on
AudiWorld - very nice.

The question is, what is the proper torque when replacing the axel bolt?

The write-up says 85 Ft/Lbs plus 1/2 a turn (180 deg).  Mr. Bentley
says 148 Ft/Lbs plus 1/4 turn (90 deg).  Seems like quite a
discrepancy.  What does the list say?

PS Having trouble finding the triple square sockets needed to remove
the half shaft.  Anyone know of a FLAPS that carries them?
-- 
Douglas in MN
95.5 Audi S//6 Avant
73 BMW R60/5 mit Toaster Tank
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list