[s-cars] Engine Rebuild Questions

[Keith Maddock]

mlp <mlped at qwest.net> wrote:
> Well Keith, if you are going to redo the valves anyway give some
> consideration to slightly "+" sizing them.  You can go 32.5mm with a tuliped
> intake, and up to 28.5 on the exhaust with an inconal replacement from
> Techtonics up in ? Oregon.  Let me know if you want a photo of the
> difference.  They claim, if you are working with a good head shop, that  you
> can (well should be able) to keep the stock valve seats.

Ackkkkkkkkkkkkkk Slippery slope ! :-D
> 
> Ah, the main bearing price sounds out of line.  Could this be mains +
> connecting rods?  Still sounds a bit high.

Based on some other information, it seems he swapped the price of the
main bearings and the gasket set, as the gasket set @190 is below
wholesale!

I checked the gasket set yesterday at the shop, and it has the MLM
gasket, very nice peice of work that gasket!.

Cheers,
Keith