[s-cars] Use of Audi for Brush Clearing, Snow Plowing....

[tim rad]

The LLTek bumper valance looks real neat and might even be less expensive
than an Audi one.

Elvis, do you know how an S6Plus would fit and anticipated cost?  (I assume
you mean one from Audi)

Tim

On 12/10/05, Tom Green < trgreen at comcast.net> wrote:
>
> There is this approach:
>
> http://www.lltek.com/S4_S6_C4_classic_frnt_valance.htm
>
> But, I think you would still have to do some repair to your cover.
> Lots can be done with the correct adhesives and body putty, but I
> doubt you could return one to original form and have it hold the
> original grills.  There are lots around with a hidden sheet metal screw
> or two.
> I would certainly be checking everybody for a good used one -- Dad's,
> Force Five, and Shokan to start.
>
> Tom
>
>
> > Date: Sat, 10 Dec 2005 11:23:35 -0500
> > From: tim rad <tr0910 at gmail.com>
> > Subject: [s-cars] Use of Audi for Brush Clearing, Snow Plowing....
> > To: Scar < s-car-list at audifans.com>
> > Message-ID:
> >       <cba8f3d70512100823q32b6d260neb6ffdd13a33efc at mail.gmail.com>
> > Content-Type: text/plain; charset=ISO-8859-1
> >
> > Dear Listers, my Audi is defective.  The log was only 24" in diameter.
> >
> > http://showandtellphotos.smugmug.com/gallery/1029640/1/47747440
> > (hosted on
> > my wife's galleries)
> >
> > Now I need a new bumper.  I can:
> >
> > 1. Put it back together with duct tape and wire.  (I found most of the
> > plastic bits and pieces)
> > 2. Find some kind of aftermarket bumper. (anyone know of a source)
> > 3. File an insurance claim against the log that wasn't supposed to be
> > there.  My deductible is $500.
> >
> > Does anybody have suggestions on finding parts, and fixing?
> >
> > regards
> > Tim
>
>