[s-cars] S6 Tach reading low RPM's

Robert Rossato r0ssat0_987 at att.net
Sun Dec 11 20:35:19 EST 2005


Maybe there's a problem with your interface cable.  Are you using a 3rd
party interface cable, or one from Ross-Tech?  If you have one from
Ross-Tech, e-mail Uwe.  They're very helpful.  If it's a 3rd party
cable, that may be the problem.  They won't work with the latest
versions of the software.

Bob

> -----Original Message-----
> From: s-car-list-bounces at audifans.com 
> [mailto:s-car-list-bounces at audifans.com] On Behalf Of Tony Curran
> Sent: Sunday, December 11, 2005 8:29 PM
> To: Robert Rossato; 'brian bilotti'; s-car-list at audifans.com
> Subject: RE: [s-cars] S6 Tach reading low RPM's
> 
> 
> Talking about VAG-COM and instrument clusters, my VAG-COM can 
> never see the
> IC - times out due to communication error.
> 
> Any ideas how to resolve this? Looked on the Ross-Tech 
> website but although
> seen recommended fix have had no luck.
> 
> Thanks
> 
> Tony
> 96 S6
> 
> -----Original Message-----
> From: s-car-list-bounces at audifans.com
> [mailto:s-car-list-bounces at audifans.com]On Behalf Of Robert Rossato
> Sent: December 11, 2005 8:23 PM
> To: 'brian bilotti'; s-car-list at audifans.com
> Subject: RE: [s-cars] S6 Tach reading low RPM's
> 
> 
> It's actually programmed for a 6 cylinder.  Otherwise it would be
> reading high, not low.
> 
> Here are the instructions for reprogramming the clusters on 
> the S6 using
> VAG-COM.
> 
> Click on "Select Control Module"
> Click on "17-Instruments"
> Click on "Recode-07"
> The  top field is labeled Software Code, and yours will display 00262.
> 
> The first two digits are irrelevant.
> The third digit is the country code; 2 - USA, 3 - Canada
> The fourth digit is # of cylinders
> The fifth digit is for type of engine; 2 - gasoline
> 
> So, change your code to 00252 and click on "Do it".
> 
> Bob
> 
> > -----Original Message-----
> > From: s-car-list-bounces at audifans.com
> > [mailto:s-car-list-bounces at audifans.com] On Behalf Of brian bilotti
> > Sent: Sunday, December 11, 2005 4:03 PM
> > To: s-car-list at audifans.com
> > Subject: [s-cars] S6 Tach reading low RPM's
> >
> >
> > S-Heads,
> >
> > My tach has read low since I have had this car. Mihnea
> > said it's "programmed" for 4 cylinders. Anybody BTDT
> > to correct this.
> >
> > Thanks
> > bb
> 
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
> 
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
> 



More information about the S-CAR-List mailing list