[s-cars] ECS Camber Plate Install

[Fred Munro]

The 2Bennett camber plates are plug & play, Dave - no mods required. They do
recommend trimming a bit off the plastic inner fender liner, but that wasn't
required on my car.

Fred Munro
'94 S4


-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com]On Behalf Of Dave Ellis
Sent: February 1, 2005 4:40 PM
To: s-car-list at audifans.com
Subject: Re: [s-cars] ECS Camber Plate Install



Hmmm... I don't have anything to contribute as far as an answer, but
from the standpoint of being about to embark upon a suspension upgrade
also, does anyone know if this also applies to the 2Bennett camber
plate?

Thanks!
Dave Ellis
'93 S4
'99.5 A4 1.8t


On February 1, 2005 16:07, Evan Desjardins wrote:
> Hi Guys,
>
> I know that the install of the ECS camber plates "Requires modified
> spring perches & slight modification to inner fender lip where the
> upper strut mount comes thru the fender."  Does anyone know of a
> write-up or any documentation available that says what the
> modification to the inner fender lip requires and how to do it?  I'm
> trying to provide as much info as possible to my mechanic to make
> this as painless as it can be.  I did ask ECS and they said to ask
> you! Heh.  Even they recognize the wisdom of "The List."
>
> Thanks boyeeeeeeeeeeeeeeeeeeeeez,
>
> -Evan
> 95 //$6

_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list