[s-cars] Opps I slid and hit a curb.

[Lee Levitt]

Or Chris Semple at Force 5 Auto.

Lee

> -----Original Message-----
> From: s-car-list-bounces at audifans.com [mailto:s-car-list-
> bounces at audifans.com] On Behalf Of TMULLANE at snet.net
> Sent: Thursday, January 13, 2005 8:20 AM
> To: jwbutler at wispertel.net
> Cc: s-car-list at audifans.com
> Subject: RE: [s-cars] Opps I slid and hit a curb.
> 
> Different.  Different from 5k, different from 200,
> different from A6.  You need a strut housing from an
> S car only (4 or 6).  An 1991 200 20v or a V8 that
> has been coverted to G60 brakes would be an option
> too.
> 
> There are a few people parting.  Try audifans
> classified or ebay.
> 
> Tom
> 
> 
> Date: Wed, 12 Jan 2005 21:26:34 -0700
> From: Jason Butler <jwbutler at wispertel.net>
> Subject: RE: [s-cars] Opps I slid and hit a curb.
> To: <s-car-list at audifans.com>
> Message-ID:
> <6.2.0.14.0.20050112211051.01cf3448 at mail.wispertel.net
> >
> Content-Type: text/plain; charset="us-ascii";
> format=flowed
> 
> Since I didn't seem to explain my self earlier and
> used improper terms,
> I'll try to explain again.
> 
> So, when I hit the curb on the front drivers side. I
> bent the arm that the
> steering tie rod attaches to on the strut.
> 
> I know the strut inserts are different on the A6/100
> vs the S4 but those
> can be replaced and I know the brakes are different
> but those should be
> able to be transferred to assuming that the spacing
> around the wheel
> bearing is the same. I took a quick look at my 5000
> CSTQ and the strut
> housing look the same as the S4 without measuring
> anything. So are the
> strut housings the same or are there different
> spacings at the wheel bearing?
> 
> Jason
> 
> 
> 
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>