[s-cars] Clamps for Samco hoses (yep, again :) )

[Adam Cramer]

I picked up some constant tourque clamps from this place: 
http://www.partssystems.com/shop/products.html?category_id=CTORQUE
 Here's the list:
3 x CT- 350 (2.750 - 3.625) 80mm = 3.15"
1 x CT- 300 (2.250 - 3.125) 70mm = 2.76"
1 x CT- 300 (2.250 - 3.125) 66mm = 2.60"
1 x CT- 250 (1.750 - 2.625) 60mm = 2.36"
1 x CT- 175 (1.000 - 1.875) 35mm = 1.38"
2 x CT-9416 (0.813 - 1.500) 30mm = 1.18"
1 x CT-9412 (0.688 - 1.250) 25mm = 0.98"
 I haven't had any problems yet. 
 Adam
95 S6 Avant

 On 7/20/05, Ivan Demkovitch <idemkovitch at hotmail.com> wrote: 
> 
> Folks,
> 
> Thinking about clamps - can't decide.
> Napa doesn't seem to carry constant torque clamps anymore (at least their
> search does not work for those numbers) Breeze support sent me to McMaster
> as their distributor.
> 
> http://www.audifans.com/pipermail/s-car-list/2004-February/025772.html
> 
> So, I'm thinking between 2 choices:
> 1. Breeze clamps - which will cost me ~$50 from McMaster
> or
> 2. Constant torque clamps from ECS Tuning ~$50
> 
> last ones does not look "fancy", but may be they work better?
> 
> Would like to hear opinions.
> I'm going to reprogram ECU for 3bar and don't like idea about hoses 
> slipping
> off
> 
> Thanks,
> Ivan
> 93' S4
> 
> 
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>