[s-cars] Clamps for Samco hoses (yep, again :) )

[todd at owensport.com]

I don't know where you live but look for a hydraulic or fluid power store in
you local area. Also a semi tractor dealer will usually have these in stock.
"A Parker Store" has some good t bolt clamps too www.parker.com Of course if
you don't know what sizes you should take your hoses with you.
You probably save money too. These type of places don't charge list

Todd




----- Original Message ----- 
From: "Ivan Demkovitch" <idemkovitch at hotmail.com>
To: <s-car-list at audifans.com>
Sent: Wednesday, July 20, 2005 8:46 AM
Subject: [s-cars] Clamps for Samco hoses (yep, again :) )


> Folks,
>
> Thinking about clamps - can't decide.
> Napa doesn't seem to carry constant torque clamps anymore (at least their
> search does not work for those numbers) Breeze support sent me to McMaster
> as their distributor.
>
> http://www.audifans.com/pipermail/s-car-list/2004-February/025772.html
>
> So, I'm thinking between 2 choices:
> 1. Breeze clamps - which will cost me ~$50 from McMaster
> or
> 2. Constant torque clamps from ECS Tuning ~$50
>
> last ones does not look "fancy", but may be they work better?
>
> Would like to hear opinions.
> I'm going to reprogram ECU for 3bar and don't like idea about hoses
slipping
> off
>
> Thanks,
> Ivan
> 93' S4
>
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>
>