[s-cars] Sunroof Stuck Open

[Tom Green]

It seems to me you guys are not really listening.   It sounded to me  
like the offer
was for some of that NASA stuff they use to repair the Shuttle, with  
a demo at
s-fest.  :-)

Tom '95 S6

Bob wrote:

> Date: Wed, 20 Jul 2005 08:10:58 -0600
> From: "Bob DG" <bobs6 at msn.com>
> Subject: RE: [s-cars] Sunroof Stuck Open
> To: james.murray at ericsson.com, r0ssat0_987 at att.net,
>     s-car-list at audifans.com
> Message-ID: <BAY5-F70BC9F09BAB2A56005002EFD70 at phx.gbl>
> Content-Type: text/plain; format=flowed
>
> I tried every kind of epoxy, nothing worked- except buying a new  
> panel. $70
> or so...

>
>
>> From: "James Murray (QA/EMC)" <james.murray at ericsson.com>
>> To: "'Robert Rossato'" <r0ssat0_987 at att.net>,S-car List
>> <s-car-list at audifans.com>
>> Subject: RE: [s-cars] Sunroof Stuck Open
>> Date: Tue, 19 Jul 2005 17:17:54 -0500
>>
>> Yup, I need to change glue... I had previously used J.B. weld...  
>> but it
>> didn't hold, so now I will try and use a epoxy to glue or plastic  
>> epoxy...
>> been through this before, didn't last, so here I go  
>> again...hopefully this
>> time I'll use the right glue.
>>
>> Must say, that's not one of the car's finer points...
>>
>> /Jamu.
>>
>> -----Original Message-----
>> From: Robert Rossato [mailto:r0ssat0_987 at att.net]
>> Sent: Tuesday, July 19, 2005 4:06 PM
>> To: James Murray (QA/EMC); S-car List
>> Subject: RE: [s-cars] Sunroof Stuck Open
>>
>>
>> That sounds encouraging.  Don't want to have to pull the sunroof  
>> assembly.
>>
>> With regards to the your panel dropping, this is easily fixed with  
>> use of a
>> good high temp epoxy to glue the spring clip back in place.  Be  
>> sure to
>> abrade the surfaces of the plastic panel before applying the  
>> epoxy.  Also I
>> highly recommend removing and epoxying in the other clip while  
>> you're at it
>> as it is only a matter of time before that breaks also.  If you  
>> haven't
>> taken care of it by S-Fest I have some excellent adhesive we can  
>> use to fix
>> it.  You can just stuff the panel back in place and it'll hold for  
>> now, may
>> have to wedge a piece of folded paper on one side or small piece  
>> of tape.
>>
>> Bob