[s-cars] Clamps for Sampco hoses (yep, again:) )

[Ivan Demkovitch]

>the NAPA catalog.  BK 705-1508 for CT300 and BK 705-1509 for CT350.

Good info, thanks.

>If the t-bolt clamps are your choice, I have 5 of the larger ones  from ECS 
>available
Will keep in mind. There is 6 needed?

>Now, don't tell me I answered too late :)

Well. Not as fast as others did :))

I decided to wait on hoses to come in and then I will hit one of the local 
stores (Napa?) to see what I like.


>
>>On Wed, 20 Jul 2005, Adam Cramer answers:
>>
>>I picked up some constant tourque clamps from this place:
>>http://www.partssystems.com/shop/products.html?category_id=CTORQUE
>>  Here's the list:
>>3 x CT- 350 (2.750 - 3.625) 80mm = 3.15"
>>1 x CT- 300 (2.250 - 3.125) 70mm = 2.76"
>>1 x CT- 300 (2.250 - 3.125) 66mm = 2.60"
>>1 x CT- 250 (1.750 - 2.625) 60mm = 2.36"
>>1 x CT- 175 (1.000 - 1.875) 35mm = 1.38"
>>2 x CT-9416 (0.813 - 1.500) 30mm = 1.18"
>>1 x CT-9412 (0.688 - 1.250) 25mm = 0.98"
>>  I haven't had any problems yet.
>>  Adam
>>95 S6 Avant
>>
>>  On 7/20/05, Ivan Demkovitch <idemkovitch at hotmail.com> wrote:
>>
>>>
>>>Folks,
>>>
>>>Thinking about clamps - can't decide.
>>>Napa doesn't seem to carry constant torque clamps anymore (at  least 
>>>their
>>>search does not work for those numbers) Breeze support sent me to  
>>>McMaster
>>>as their distributor.
>>>
>>>http://www.audifans.com/pipermail/s-car-list/2004-February/ 025772.html
>>>
>>>So, I'm thinking between 2 choices:
>>>1. Breeze clamps - which will cost me ~$50 from McMaster
>>>or
>>>2. Constant torque clamps from ECS Tuning ~$50
>>>
>>>last ones does not look "fancy", but may be they work better?
>>>
>>>Would like to hear opinions.
>>>I'm going to reprogram ECU for 3bar and don't like idea about hoses
>>>slipping
>>>off
>>>
>>>Thanks,
>>>Ivan
>>>93' S4
>