[s-cars] possible ignition problem

[Kent McLean]

Adam Cramer wrote:
 > The check engine light isn't on.  Does this fault code test still work
 > if I don't have a CEL?


The test will still work, you just won't be able to see the
codes. :)

 From <http://www.sjmautotechnik.com/trouble_shooting/ecuf20v.html#fcs4>

   If the "Check" engine light does not come on with the ignition
   key turned to the on position, then you may have a burned out
   bulb in the instrument panel. Some vehicles may not have this
   bulb installed at the factory.

   If this is the case, you "may" be able to install a 1.2 Watt
   instrument panel light bulb (Osram 2721) into the empty socket
   with wiring behind the instrument cluster

--
Kent McLean
'94 100 S Avant, "Moody"
'89 200 TQ, "Bad Puppy" up in smoke