[s-cars] Mixture Adaption

[Sitticheep Somkearti]

Okay, Just change the new O2 and clear code. But the fault still there after
drive a while. Do I need to put the new adaptation value and if this need to
be done what value should I key in?

SS

----- Original Message -----
From: "Sean Douglas" <quattro20v at telus.net>
To: "'Sitticheep Somkearti'" <sitticheep at hotmail.com>;
<s-car-list at audifans.com>
Sent: Friday, July 22, 2005 10:04 PM
Subject: RE: [s-cars] Mixture Adaption


> Bentley says:
>
> - fuel system pressure too low
> - Spark plugs, ignition coil, ignition coil power output stage
> malfunctioning
> - Leakage in exhaust system before three way catalytic converter
> - Incorrect signal for mass air flow sensor -G70-
>
> I'd start with the ignition components, have you noticed missing or lack
> of power?
>
>
> Sean Douglas
> 1997 Audi S6//RS2-spec
> 1990 Audi 90 quattro 20v
>
>
> > -----Original Message-----
> > From: s-car-list-bounces+quattro20v=telus.net at audifans.com
> > [mailto:s-car-list-bounces+quattro20v=telus.net at audifans.com]
> > On Behalf Of Sitticheep Somkearti
> > Sent: Monday, July 18, 2005 12:52 AM
> > To: s-car-list at audifans.com
> > Subject: [s-cars] Mixture Adaption
> >
> >
> > List, The VAG-COM show one fault on my S6 year 96 "00561 -
> > Mixture Adaptation 15-00 - Adaption Limit(Add) Not Reached"
> > What fault actually is this and Any idea where should I start with?
> >
> > Many thanks,
> >
> >
> > _______________________________________________
> > S-CAR-List mailing list
> > S-CAR-List at audifans.com
> > http://www.audifans.com/mailman/listinfo/s-> car-list
> >
>
>