[s-cars] Re: Coils and PSO's

[Dave Forgie]

Chris:  From pg. 3/9 of an later 1.8t Audi B5 wiring diagram (and a 41/4 of a later Jetta IV 1.8t Bentley), my interpretation of the pinouts are:

1 = hot to primary coil
2 = secondary coil ground
3 = hot signal from the ECU to the POS
4 = POS ground

Now if it wasn't for that nagging "dwell" issue suggested by Mark S., this looks like a winner to me.  (Sounds too good to be true - replace all the coils and the POS for a fraction of the cost of going with old style OEM parts).

Hey.  Progress!! (except for those nasty Bremi recalls -which I am sure won't happen again).

Dave F.


This e-mail and its attachments are intended solely for the person or entity
to which it is addressed and may contain confidential and/or privileged  
information.  Any review, dissemination, copying, printing or other use of  
this e-mail by persons or entities other than the addressee is prohibited   
If you have received this e-mail in error, please contact the sender  
immediately and delete the material from any computer.