[s-cars] RE: license plate holder

[Lee Levitt]

John,

If your car never had a front license plate then it doesn't have 
holes drilled in the bumper. To mount the plate holder, you need 
to drill out the front bumper cover to locate the bolt 
receptacles.

If it's not required in your state, I would not do it.

Lee



On Tue Jun 07 11:34:37 PDT 2005, John Farr 
<alightman at earthlink.net> wrote:

> I also need to put a front plate on my '93 S4. It's passing on to 
> the wife, as I just bought an '02 S6 for my daily driver. I've 
> driven for 20 years without one, 2 Audis and an RX7, but she's 
> worried. I think it ruins the look of the front end of these 
> cars. The dealer will happily sell me a bracket for only $89 ! My 
> question is: shouldn't one from a 100 from the same vintage work? 
> The salvage yards around here are thick with them.
> Thanks,
> John
> '93 S4 (semi-retired)
> '02 S6
> 
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
> 
> 
>