[s-cars] Removing Timing Belt Cover

[James Murray (QA/EMC)]

Tony, I remember having problems with this too... if I remember correctly
there is more than two clips, look farther down on the left hand side...
that or it's something to do with the way it fits into the bottom cover
(memory is foggy). In any case it was much easier to remove once I started
taking off all the parts to get to the belts... 

Unless you plan to replace the CPS, you won't get much benifit from removing
the cover. The wire snakes behind the cam sprocket into the CPS, the
connector is on the outside next to the first injector. 

/Jamu.

-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com]
Sent: Friday, June 17, 2005 6:43 PM
To: S-Car-List at Audifans.Com
Subject: [s-cars] Removing Timing Belt Cover


Getting around to check out the wiring of the CPS and can not remove the
timing belt cover. I release the two clips but cover only comes out about an
inch before jamming.

Is there a knack to removing this?

TIA

Tony
96 S6

_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list