[s-cars] Removing Timing Belt Cover

[Tony Curran]

RE: [s-cars] Removing Timing Belt CoverThanks James. I plan to remvoe the
CPS to check the wiring for breaks. Do I have to remove the tensioner?

I'll look for another clip.

Tony
96 S6
  -----Original Message-----
  From: James Murray (QA/EMC) [mailto:james.murray at ericsson.com]
  Sent: June 17, 2005 7:04 PM
  To: S-Car-List at Audifans.Com; 'tony.curran at sympatico.ca'
  Subject: RE: [s-cars] Removing Timing Belt Cover


  Tony, I remember having problems with this too... if I remember correctly
there is more than two clips, look farther down on the left hand side...
that or it's something to do with the way it fits into the bottom cover
(memory is foggy). In any case it was much easier to remove once I started
taking off all the parts to get to the belts...

  Unless you plan to replace the CPS, you won't get much benifit from
removing the cover. The wire snakes behind the cam sprocket into the CPS,
the connector is on the outside next to the first injector.

  /Jamu.

  -----Original Message-----
  From: s-car-list-bounces at audifans.com
  [mailto:s-car-list-bounces at audifans.com]
  Sent: Friday, June 17, 2005 6:43 PM
  To: S-Car-List at Audifans.Com
  Subject: [s-cars] Removing Timing Belt Cover



  Getting around to check out the wiring of the CPS and can not remove the
  timing belt cover. I release the two clips but cover only comes out about
an
  inch before jamming.

  Is there a knack to removing this?

  TIA

  Tony
  96 S6

  _______________________________________________
  S-CAR-List mailing list
  S-CAR-List at audifans.com
  http://www.audifans.com/mailman/listinfo/s-car-list