[s-cars] HRSB install questions

[Joe Pizzimenti]

Rocketboy,
You need to drop the rear portion of the exhaust.  Comes with the territory.


On Sun, 20 Mar 2005 16:57:40 -0800, Adam Cramer <crameradam at gmail.com> wrote:
> OK, my brother and I attempted to install my new HRSB on my 95 avant
> today but we couldn't physically wedge the bar into the correct space.
> 
> How the hell do you get the bar over the exhaust?  Is there a special
> trick to it? Do I need to drop the exhaust (I really don't want to do
> that)?
> 
> We had the front wheels up on ramps, the back was supported by two
> jack stands in the rear and one floor jack in the middle rear.  I
> thought that would be enough height to twsit the new bar up into the
> right spot, but I was wrong.
> 
> After much pulling and twisting, we were able to pull the old 17mm bar
> out the drivers side of the car, but we couldn't wedge the new 26mm
> bar back in the same way.
> 
> So, is there any way to get the new bar in without putting the car up
> on a hoist or removing the exhaust?
> 
> Thanks for your help.
> 
> Adam
> 95 S6 Avant
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>