[s-cars] have a cracked OZ SL,

Elijahallen92 at aol.com Elijahallen92 at aol.com
Sun May 15 19:33:05 EDT 2005


 
I think your right. Forrest, now you need three spacers to match the one  
wheel.
 
In a message dated 5/15/2005 7:16:00 PM Eastern Standard Time,  
larrycleung at gmail.com writes:

Forrest,  et. al.;

I thought that ET32 already sits further out from the car's  centerline
than ET35.

Spacer's won't fix the problem, if that is the  case. 

Correct me if I'm wrong.

LL - NY

On 5/15/05, Keith  Maddock <keith.maddock at gmail.com> wrote:
> On 5/15/05, forrest  bradshaw <sola4est at yahoo.com> wrote:
> > my wheels are et32, I  found a replacement wheel that is et35, can I add 
a 3mm spacer to the et35 to  make it the same as the et32s on my car or would 
it be differant?
>  
> Nope, that should work.  Does anyone sell 3mm spacers  though?
> 
> > or a rim shop says they can weld the crack for  55 and then restraighten 
it for 70, the crack is fairly small and its on the  inner lip inside the rim, 
no air leaks out of the tire its not that bad.   should I just have the wheel 
fixed?
> 
> I'd go for the spacer  now... keep the "cracked" wheel in the garage in
> case you trash  another wheel sometime and can't find a further
> replacement - the  "cracked" wheel might be  cheaper to repair than the
> other broken  wheel at that time....
> 
> Cheers,
> Keith
>  _______________________________________________
> S-CAR-List mailing  list
> S-CAR-List at audifans.com
>  http://www.audifans.com/mailman/listinfo/s-car-list
>
_______________________________________________
S-CAR-List  mailing  list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list






More information about the S-CAR-List mailing list