[s-cars] Into the Door - Again

[tim rad]

Pictures would be wonderful.  I will have to pull my drivers door
apart because the screws holding the outer door handle in place seem
to be coming loose.  Been procrastinating...

Tim

On 5/14/05, Douglas Fifield <douglas.fifield at gmail.com> wrote:
> Damn, I was hoping that I wouldn't have to do this.
> 
> As you may recall, I had to tear my passenger side door apart to get
> the outer latch out for a repaint/blend after replacing the front
> fender.
> 
> Got things all put back together with full functionality and no
> additional wind noise that I could detect.  I left the last piece of
> handle trim off (the one that hides the first two screws to come out)
> in case I had to remove the inner panel for any reason.
> 
> Well, the other half was commenting on it a few days ago, so I put it
> in.  Last night, my daughter could not open the door from the inside.
> Sure nuff, pull on the handle but no activity at the latch.  Felt like
> the proper resistance on the handle though.
> 
> Just pulled the handle out hoping that the cable had come unhooked,
> but no dice.  Looks like I'll have to tear the whold damn thing apart
> again to gain access to the latch linkage system and see what is not
> right.
> 
> If anyone has an alternative suggestion, I would love to hear it now.
> Baring that, if anyone wants photos of the inside of an S6 front door,
> let me know.
> --
> Douglas in MN
> 95.5 Audi S//6 Avant
> 73 BMW R60/5 mit Toaster Tank
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>