[s-cars] '93 S4 FMIC sizes

[Mark Strangways]

For my 3 cents worth...

Longer means better cooling lower exit temps, but at a cost. Longer means 
more restriction to flow. This can be a problem, but not for a GT3071R. You 
are not going to have a problem with pressure there my friend. A few psi 
will not likely provide much more heat to the compressor exit temps as long 
as it remains fairly efficient.

Longer is easier to fit, as long as it's not TOO long, and may infact see 
better air than a taller one that's hidden behind half the bumper.

Mark S
----- Original Message ----- 
From: "Rich Palazzoli" <bing93urs4 at gmail.com>
To: <s-car-list at audifans.com>
Sent: Tuesday, November 29, 2005 4:25 PM
Subject: [s-cars] '93 S4 FMIC sizes


looking to put a bar and plate FMIC on my '93 S4 ,have seen may different
sizes and wondering what the largest that will fit in the front of that car,
Going  034EFI stage IIa with a Garrett GT3071R turbo and will need to flow
some air ,ANY  BTDT with a 24x12x3 ??? or is that too large, was looking at
Javads 20x9x3 on the 034 site but thinking a little bigger........TIA


--
Bing
01' A4 30vTQM
93' urS4
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list