[s-cars] '93 S4 FMIC sizes

[Emre Washburn]

Here is my bar and plate FMIC, CORE dimensions of 18x10x2.5:

<http://www.trdsupra.com/images/media/32_Picture_6696.JPG>

I only needed to trip a few things to make it fit, nothing serious or
visible. So far, I have none of the pinging I used to have before, and
the butt dyno is happy for sure. I may have a need to notch the bumper
to get more airflow when I step up to a bigger turbo, but this is how
it looks now:

<http://www.trdsupra.com/images/media/32_Picture_6702.JPG>

Had I removed my A/C condenser, or swapped over to an R134a unit, I
could have easily ran a 3" thick unit, bit for right now, this is more
than fine.

--
Emre
92 //S4
90 Cq
40 valves 'O plenty!


On 11/29/05, Rich Palazzoli <bing93urs4 at gmail.com> wrote:
> looking to put a bar and plate FMIC on my '93 S4 ,have seen may different
> sizes and wondering what the largest that will fit in the front of that car,
> Going  034EFI stage IIa with a Garrett GT3071R turbo and will need to flow
> some air ,ANY  BTDT with a 24x12x3 ??? or is that too large, was looking at
> Javads 20x9x3 on the 034 site but thinking a little bigger........TIA
>
>
> --
> Bing
> 01' A4 30vTQM
> 93' urS4
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>