[s-cars] Rear caliper rebuild

[frank@s-cars.org]

Greetings folks,

As a matter of fact, I do have some of these in stock (i.e. in my basement
/ parts department). Let me know if you are interested and I'll see how
many I have.

I hope that all is well.

Frank--

> The numbers from Gary Martin are good for the e-brake oil (grease)
> seal.  Chicago Rawhide makes
> a seal that fits, the CR 16x24x7 HMS4 R.  If you can find a NAPA
> store stocking this part 6405 you are
> in luck.  They are pricey if you have to special order.   Do you have
> any left, Frank?
>
> I am sure there is an industrial bearing and seal supply house in the
> big city that has this part or a substitute
> and probably can supply the other o-rings and seals you need based on
> size, either comparing the old part
> or using your measurements.
>
> The write-up you referenced was done by Constantine Bogach.  Maybe he
> is lurking on the list and might
> provide some info.
>
> If you are successful at this I have a pair that need rebuilding
> after I powdercoat them.
>
> Tom '95 S6, pearl white
>           '95.5 S6 Avant, black pearl,  The Twins
>