[s-cars] Rear caliper rebuild

[brian bilotti]

Guys,
I just sent a set of rear calipers to these guys who
do ALL types of brakes including Brembos:

www.goldlinebrakes.com

Let's just say they were so hideously rusted and in
dire need help that I had almost written them off.

I sent them to John at Goldline, completely rebuilt
them AND coated them with a black polymer for $125
each.
Yeah I know, you can get a rebuilt set from worldpac
for about that but I was able to get them coated too.

BTW, they turned out beatifully.

HTH
Brian  

--- Tom Green <trgreen at comcast.net> wrote:

> The numbers from Gary Martin are good for the
> e-brake oil (grease)  
> seal.  Chicago Rawhide makes
> a seal that fits, the CR 16x24x7 HMS4 R.  If you can
> find a NAPA  
> store stocking this part 6405 you are
> in luck.  They are pricey if you have to special
> order.   Do you have  
> any left, Frank?
> 
> I am sure there is an industrial bearing and seal
> supply house in the  
> big city that has this part or a substitute
> and probably can supply the other o-rings and seals
> you need based on  
> size, either comparing the old part
> or using your measurements.
> 
> The write-up you referenced was done by Constantine
> Bogach.  Maybe he  
> is lurking on the list and might
> provide some info.
> 
> If you are successful at this I have a pair that
> need rebuilding  
> after I powdercoat them.
> 
> Tom '95 S6, pearl white
>           '95.5 S6 Avant, black pearl,  The Twins
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
> 



		
__________________________________ 
Yahoo! Mail - PC Magazine Editors' Choice 2005 
http://mail.yahoo.com