[s-cars] Protective film

Tom Green trgreen at comcast.net
Mon Oct 10 15:14:25 EDT 2005


I have this A6 kit on my sedan.  The hood and small fender triangles  
are a perfect fit.
The bumper obviously not-short.  The under headlight does not have  
washer cutouts.  You
need to look at another selection for a diagram of the pieces.  Pick  
a model and year
that would be closest to get the best idea what this specific kit  
looks like.  I know of no
other pre-cut kits for vehicles this old, and I don't know why they  
won't fix this diagram.
(actually I do, they don't sell many any more.  Who wants to protect  
10 year old paint ?)

The other choice is a custom cut job that at my last pricing 2 years  
ago was about $550.

The kit came with the installation kit as well.  It does take  
patience and fanatic cleanliness
during installation, but is not difficult.

Now if someone who lived close to North Wilkesboro, N.C. would drop  
over there with an
s-car, they have promised to measure and make a pattern specific to  
the vehicle.  ;-)

Tom  '95 S6
           '95.5 S6 Avant


<http://www.invinca-shield.com/>



Date: Mon, 10 Oct 2005 11:32:49 -0600
From: "Aaron Taylor" <aaront at cox-internet.com>
Subject: [s-cars] Protective film
To: <s-car-list at audifans.com>
Message-ID: <20051010173252.VRDT15000.fe6 at LAPTOPX>
Content-Type: text/plain;    charset="us-ascii"

I know this has been tossed around before but im looking to find the  
best
fitting 3m or similar clear protective film for the front of our Scars.

Anybody done this recently?  Comments?

Thanks

Aaron





More information about the S-CAR-List mailing list