[s-cars] Whats the best chipset for a full RS2 setup

[FvAMI@aol.com]

In a message dated 10/22/05 8:02:39 PM Pacific Daylight Time, 
myhoppen at yahoo.com writes:


> Now I see he only offers the MTM version. At this point I have the RS2 
> turbo, Exhaust cam & Exhaust manifold. The consistant strong pulls ended however 
> when I installed the RS2 injectors & MAF sensor. 

If you want to use the MTM K24 software then switch your injectors back to 
stock. Otherwise you will be running much too rich. Also the boost will be less 
than possible at redline. The boost above 5500 rpm is dialed back for the K24 
and the RS2 can sustain a much higher boost level all the way to redline ... 
one of the main reasons to put in an RS2 turbo.

Best regards,
Feico van der Laan