[s-cars] Whats the best chipset for a full RS2 setup

[Daniel Koropchak]

When I purchased the Lehmann chipset it was packaged with the RS2 turbo & exhaust manifold but not the injectors or RS2 MAF. This makes me feel it has the appropriate programing for the turbo but possibly not the Injectors & MAF. I do suspect that it is running rich but have not installed the Air/Fuel guage yet to verify. Sean Douglas has left his remarks about his experiences with various chipsets for which I am grateful. Are there any others out there that had similar problems as I ? Are there any others out there who can share their knowledge & experience with various chipsets for Our RS2'd cars. I have not heard about MTM or MRC. Please help I need desperately to solve this problem. 

FvAMI at aol.com wrote: In a message dated 10/22/05 8:02:39 PM Pacific Daylight Time, myhoppen at yahoo.com writes: 


Now I see he only offers the MTM version. At this point I have the RS2 turbo, Exhaust cam & Exhaust manifold. The consistant strong pulls ended however when I installed the RS2 injectors & MAF sensor. 

If you want to use the MTM K24 software then switch your injectors back to stock. Otherwise you will be running much too rich. Also the boost will be less than possible at redline. The boost above 5500 rpm is dialed back for the K24 and the RS2 can sustain a much higher boost level all the way to redline ... one of the main reasons to put in an RS2 turbo. 

Best regards, 
Feico van der Laan