[s-cars] How do you remove front signal bulb?

[Lee Levitt]

Randy writes:
> 
> In an effort to find the solution to my non working left 
> signal and buzzing sound, I want to replace my front signal 
> bulb, the last time I did this I ended up prying off the 
> clear corner and glueing it back on..... there must be a 
> better way, but I can't see how to get in behind it easily?  
> Any thoughts?

Uh yea.

There's a doohickey that holds the corner in. If you turn it 1/4 turn, it
releases the entire corner and you can then push the whole thing out of the
fender. IIRC, it's white or yellow, small, about the size of a dime, at the
top of the corner light (under the hood). Put a large screwdriver in, turn
it 1/4 turn and you're free.

Then the bulb holder uncrews 1/4 turn or less and it's free too.

Assembly is pretty much the reverse of disassembly...

Note, this is different than the doohickeys that aim the headlights. Those
are 6 mm hex bolts.

Lee