[s-cars] Outside Temperature Light

[Sean Douglas]

Replaced the temperature gauge light on the weekend, not too hard all
that is needed is a 60 mA microlamp (Radioshack 7219)and a soldering
iron.

Takes about 30 minutes.

Abbreviated instructions;

1. remove instrument cluster (IC)
2. remove back cover held on by mini Torx screws
3. remove temp gauge
4. remove back of temp gauge to expose circuit board
5. desolder microlamp
6. solder new microlamp
7. install in reverse

Sean Douglas
1997 Audi S6//RS2-spec
1990 Audi 90 quattro 20v