[s-cars] 1.8t Coil Pack Conversion - Link to first photo
Tony Curran
tony.curran at sympatico.ca
Tue Sep 20 21:15:53 EDT 2005
So Dave,
What's holding the coils in place? Assume no lid is required!!!
Tony
96 S6
-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com]On Behalf Of Dave Forgie
Sent: September 20, 2005 6:30 PM
To: s-car-list at audifans.com
Subject: [s-cars] 1.8t Coil Pack Conversion - Link to first photo
The conversion works. I took it out on the highway and the car ran
flawlessly. No more missing that was coming from a dieing OEM coil (or POS
or Both). Parts cost around CDN$250 (coil packs, connectors, pins, etc).
This is double the cost of one OEM coil but I have five new coils and the
equivalent of new POS units as well. (Equivalent of about CDN$925 based on
my math).
Photo is on AudidoodiWorld at:
http://forums.audiworld.com/s4s6/msgs/83157.phtml
Instructions for those that want to try this (and improve on it) to follow.
DaveF.
This e-mail and its attachments are intended solely for the person or entity
to which it is addressed and may contain confidential and/or privileged
information. Any review, dissemination, copying, printing or other use of
this e-mail by persons or entities other than the addressee is prohibited
If you have received this e-mail in error, please contact the sender
immediately and delete the material from any computer.
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list
More information about the S-CAR-List
mailing list