[s-cars] RS2 turbo and EM install questions

[Taka Mizutani]

Rolf-
You have Samco boost hoses, metal crossover pipe and heavy-duty bypass valve
installed already? I would recommend you do that before installing this
stuff and upping the boost. I'd also recommend larger injectors- you have
software to run RS2 on stock injectors, MAF and cams?
 Taka

 On 9/23/05, RM <waves at epix.net> wrote:
>
> Welp, looks like the 90tq project is sold. I removed the turbo and EM from
> the car last night. The plan is to install those parts on my 94 S4.
> Without
> the front end on the 90, it took about 1.5 hours to remove the parts. That
> was easy due to the fact i had used all new hardware and they haven't seen
> the ravages of Pennsylvania salt roads. To install these on the S4, i
> assume
> it's probably easiest to remove the front bumper assembly to facilitate
> access to the area, correct? Other than plopping the turbo and EM on, and
> having the ecm modified, is there anything else i need to do immediately
> before driving it?
>
> Rolf
>
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.344 / Virus Database: 267.11.3/107 - Release Date: 9/20/2005
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>